Beurer
GL48/GL49
25
3
Pressing the rocker switch “–” [6] will display the previous measured value each time. You
can display a maximum of 900 previous measurements.
4
You can cancel the process at any time. To do so, press the On/Off button or wait until the
device switches itself off automatically after 2 minutes.
6.2 Displaying average blood glucose values
You can display the average measured blood glucose value from the last 7, 14, 30 and 90 days.
1
Switch the monitor on using the On/Off button [4]. The initial display is shown briefly. Press
the “+” rocker switch [6] twice.
The measurement unit of the blood glucose value, “
” and the average value are displayed.
2
Press “+” [6] repeatedly to display the average value for 7, 14, 30 and 90 days.
3
You can cancel the process at any time. To do so, press the On/Off button or wait until the
device switches itself off automatically after 2 minutes.
No. Explanation
97
0008 07d
mg/dL
1
2
3
0008 07d
5
4
mmol/L
1
2
3
1 Average value
2 Number of days, e.g. 7
3 Number of saved val-
ues used to calculate
the average
6.3 Displaying average blood glucose values for labelled values
You can display the average measured blood glucose value for labelled values from the last 7, 14,
30 and 90 days.
1
Switch the monitor on using the On/Off button [4]. The initial display is shown briefly. Press
the “+” rocker switch [6] twice.
The measurement unit of the blood glucose value, “
” and the average of all measured
values are displayed.
