4
This is meant as a toy and /or training device only. Inspect equipment before each use. 0216C R1.1 06.29.20
Standard Jump Assembly:
For the base, you will use the parts (A), (B), (E) and (F). Insert two short poles (B) into one five-way connector (E) as shown. Repeat
this step for the other five-way connector (E). Connect the two five-way connectors (E) with the long pole (A). Place end caps (F) on
the exposed ends of the short poles (B).
Assemble the upright poles. Take one of the long poles (A) and one of the short poles (B) and join them using an internal pole
connector (C). Repeat for the other upright pole. Insert the upright poles into the upward facing holes of the five-way connectors (E).
Next, assemble blue jump pole (G) and the 2 black pole clasps (D). The black clasps connect to the blue jump bar (G) and the white
long poles (A), on opposite ends. Finally, place 2 soft black caps (F) on the exposed
tips of the upright poles (A).
D
E
C
F
A
B
G
A
3 White long poles- 25.5'' long
B
6 White short poles- 8.5'' long
C
2 Internal connectors- 4.5'' long
D
2 Black pole clasps
E
2 Five-way pole conectors
F
6 Soft black caps
G
1 Blue jump pole
