5
This is meant as a toy and /or training device only. Inspect equipment before each use. 0216C R1.1 06.29.20
Tire Jump Assembly:
For the base, you will use the parts (A), (B), (E) and (F). Insert two white short poles (B) into one five-way connector (E) as shown.
Repeat this step for the other five-way connector (E). Connect the two five-way connectors (E) with the white long pole (A). Place
end caps (F) on the exposed ends of the short poles (B).
Assemble the upright poles. Take one of the (A) white long poles and one of the (B) white short poles and join them using an internal
pole connector (C). Repeat for the other upright pole. Insert the upright poles into the upward facing holes of the five-way connectors
(E). Next, assemble blue tire jump (G
) and the 2 black pole clasps (D). The “teeth” of the black clasps connect to the
blue tire (G) and
the upright poles. Finally, place 2 soft black caps (F) on the exposed tips of the
upright poles.
D
E
C
F
A
B
G
A
3 White long poles- 25.5'' long
B
6 White short poles- 8.5'' long
C
2 Internal connectors- 4.5'' long
D
2 Black Tire Jump clasps
E
2 Five-way pole conectors
F
6 Soft black caps
G
1 Blue tire jump
