Better Music Builder Q Series, Owner'S Manual

Page: 15 / 28

15
FRONT PANEL OPERATION
1. ADJUSTING THE ECHO/REVERB/MIC/MUSIC
VOLUME
Turn the knob clockwise to increase and counter-clockwise to
decrease the ECHO/REVERB/MIC/MUSIC volume. Press
knob once ( ) go to next volume adjusting.
After turning on the power, the LCD screen will display the
following, a red line is under MUSIC VOLUME:
2. INPUT MODE SELECTION (AUX, BLUETOOTH,
SPDIF)
Press this button to manual select the three inputs source AUX
[1: priority source], BLUETOOTH [2], SPDIF [3], once at a
time to browse through the available selection.
OPERATION
VOLUME
FUNCTION
ECHO
REVERB
MIC
MUSIC
VOLUME
MIN MAX
60 65 37 35
REVERB MIC ECHO
M1
CH:01
480.350MHz CH:01
505.350MHz
MODE
Stereo
FORMAT
Bluetooth
INPUT
MUSIC
Analog Input and Digital Input
Built-In 2 Wireless Microphones
M1
MODE
Stereo
FORMAT
AUX
INPUT
3. SYNCING AMP FREQUENCY WITH
MICROPHONES
STEP 1: Turn ON the amp and microphone.
STEP 2: Press PAIR MIC1/PAIR MIC2 button. The LCD screen
will display frequency. Turn the VOLUME button to select the
desired frequency. Then press VOLUME button to scan
frequency. The red “IR” LED indicator will flash.
STEP 3: Point the microphone’s infrared port (IR) directly at the
amp’s infrared port (IR). Once scanning is completed, the red
“IR” LED indicator stop flashing and the PAIR MIC1/PAIR
MIC2 LED indicator stay on.
4. SETTING UP BLUETOOTH CONNECTION ON
SMARTPHONES
STEP 1:
Press BLUETOOTH button, the BLUETOOTH LED
indicator will flash.
STEP 2:
Go to bluetooth setting on your phone, scan the
devices and connect to amp “Q-3”. After connected, the
BLUETOOTH LED indicator stay on.
STEP 3:
Play your mobile phone music. Make sure the INPUT
Mode is BLUETOOTH.
INPUT BLUETOOTH PAIR MIC 2 PAIR MIC 1
INPUT BLUETOOTH PAIR MIC 2 PAIR MIC 1
IR
Q
-3
U
H
F
W
IR
E
L
E
S
S
M
IC
R
O
P
H
O
N
E
480.350
MHz
GYRO
MUTE
Please make sure that the other handheld microphone is powered off
when adjusting the frequency on one microphone.
Each unit is fully tested and qualified by the manufacturer. However, due to the
nature of wireless connection, interference may occur because of local environments
and/or radio signals emitted by other wireless devices within the household.
NOTE
INPUT BLUETOOTH PAIR MIC 2 PAIR MIC 1
Maximum Frequency
Matching Distance: 2 feet
SYNCING
PROCESS
VOLUME
FUNCTION
ECHO
REVERB
MIC
MUSIC
WIRELESS MICROPHONE
&
PRE-PROCESSOR
&
BLUETOOTH
&
AMPLIFIER
VOLUME
MIN MAX
INPUT PAIR MIC 2 PAIR MIC 1 BLUETOOTH
Better Music Builder
®
®
USB TYPE-C
iR
ALL-IN-ONE DIGITAL MIXING AMP
60 65 37 35
REVERB MIC ECHO
M1
CH:01
480.350MHz CH:01
505.350MHz
MODE
Stereo
FORMAT
Bluetooth
INPUT
MUSIC
Analog Input and Digital Input
Built-In 2 Wireless Microphones
Q-3
Model
iR
Operating
Welcome...