14
15
LO
HI
MHz
GYRO
MUTE
U
H
F
W
IR
E
L
E
S
S
M
IC
R
O
P
H
O
N
E
IR
1
3
2
4
5
6
7
HANDHELD MICROPHONE:
HANDHELD MICROPHONE LCD DISPLAY:
1
2
4
3
5
BATTERY STATUS:
Indicates battery life.
FREQUENCY:
Current value depends on setting.
GYRO:
Intelligent Energy Control (IEC) Features.
After turning on the power, the LCD screen will
display the following:
Batteries are not covered under our product warranty.
NOTE
Indicates full battery on the microphone.
A full battery lasts up to 8 hours.
Full Battery
Low Battery
LCD screen blinks
when battery is
extremely low.
Indicates low battery on the microphone.
When the microphone LCD screen is
blinking, it’s time to replace the batteries.
MHz
GYRO
6
7
AA
ALKALINE
BA
TTER
Y
AA
ALKALINE
BA
TTER
Y
INTERCHANGEABLE MICROPHONE HEAD
LCD DIGITAL DISPLAY:
Displays frequency and battery
status.
IR PORT:
Infrared port for the Wireless Infrared Auto
Sync Technology. Point the microphone’s infrared port at
the receiver’s infrared port to allow communication.
POWER BUTTON
TRANSMISSION POWER LEVEL SWITCH
BATTERY COVER
BATTERY COMPARTMENT:
Insert 2x1.5V AA battery or
2x1.2V rechargeable AA battery.
MHz
IR
8
9
10
GYRO
IR
MHz
GYRO
IR
MHz
GYRO
8
10
9
BATTERY STATUS:
FRONT PANEL OPERATION
1. ADJUSTING THE ECHO/REVERB/MIC/MUSIC
VOLUME
Turn the knob clockwise to increase and counter-clockwise to
decrease the ECHO/REVERB/MIC/MUSIC volume. Press
knob once ( ) go to next volume adjusting.
After turning on the power, the LCD screen will display the
following, a red line is under MUSIC VOLUME:
2. INPUT MODE SELECTION (AUX, BLUETOOTH,
SPDIF)
Press this button to manual select the three inputs source AUX
[1: priority source], BLUETOOTH [2], SPDIF [3], once at a
time to browse through the available selection.
OPERATION
VOLUME
FUNCTION
ECHO
REVERB
MIC
MUSIC
VOLUME
MIN
MAX
REVERB
MIC
ECHO
M1
CH:01
480.350MHz
CH:01
505.350MHz
MODE
Stereo
FORMAT
Bluetooth
INPUT
MUSIC
Analog Input and Digital Input
Built-In 2 Wireless Microphones
CH:01
480.350MHz
CH:01
505.350MHz
Analog Input and Digital Input
Built-In 2 Wireless Microphones
M1
MODE
Stereo
FORMAT
Bluetooth
INPUT
M1
MODE
Stereo
FORMAT
AUX
INPUT
M1
M1
Stereo
Stereo
MODE
FORMAT
3. SYNCING AMP FREQUENCY WITH
MICROPHONES
STEP 1:
Turn ON the amp and microphone.
STEP 2:
Press PAIR MIC1/PAIR MIC2 button. The LCD screen
will display frequency. Turn the VOLUME button to select the
desired frequency. Then press PAIR MIC1/PAIR MIC2 button
to scan frequency. The red “IR”
LED indicator will flash.
STEP 3:
Point the microphone’s infrared port (IR) directly at the
amp’s infrared port (IR). Once scanning is completed, the red
“IR”
LED indicator stop flashing
and the PAIR MIC1/PAIR
MIC2
LED indicator stay on.
4. SETTING UP BLUETOOTH CONNECTION ON
SMARTPHONES
STEP 1:
Press BLUETOOTH button, the BLUETOOTH LED
indicator will flash.
STEP 2:
Go to bluetooth setting on your phone, scan the
devices and connect to amp “Q-3”. After connected, the
BLUETOOTH LED indicator stay on.
STEP 3:
Play your mobile phone music. Make sure the INPUT
Mode is BLUETOOTH.
INPUT
BLUETOOTH
PAIR MIC 2
PAIR MIC 1
BLUETOOTH
PAIR MIC 2
PAIR MIC 1
INPUT
BLUETOOTH
PAIR MIC 2
PAIR MIC 1
PAIR MIC 2
PAIR MIC 1
INPUT
IR
Q
-3
U
H
F
W
IR
E
L
E
S
S
M
IC
R
O
P
H
O
N
E
MHz
GYRO
MUTE
Please make sure that the other handheld microphone is powered off
when adjusting the frequency on one microphone.
Each unit is fully tested and qualified by the manufacturer. However, due to the
nature of wireless connection, interference may occur because of local environments
and/or radio signals emitted by other wireless devices within the household.
NOTE
INPUT
BLUETOOTH
PAIR MIC 2
PAIR MIC 1
INPUT
BLUETOOTH
Maximum Frequency
Matching Distance: 2 feet
SYNCING
PROCESS
VOLUME
FUNCTION
ECHO
REVERB
MIC
MUSIC
WIRELESS MICROPHONE
&
PRE-PROCESSOR
&
BLUETOOTH
&
AMPLIFIER
VOLUME
MIN
MAX
INPUT
PAIR MIC 2
PAIR MIC 1
BLUETOOTH
Better Music Builder
®
®
USB TYPE-C
iR
ALL-IN-ONE DIGITAL MIXING AMP
REVERB
MIC
ECHO
M1
CH:01
480.350MHz
CH:01
505.350MHz
MODE
Stereo
FORMAT
Bluetooth
INPUT
MUSIC
Analog Input and Digital Input
Built-In 2 Wireless Microphones
Q-3
Model
iR
Operating
Welcome...
Page 14,15-Control & Functions_MIC, Operation.pdf 1 11/4/2020 6:40:52 PM
Summary of Contents for Q Series
Page 27: ...27 MAINTENANCE NOTE ...