36
Assembly Instructions for Floating Swivel Mount
41.
A
ttach two Cable Wheels (Z) to the back side of Floater Post (U)
with four 3/4” Bolts (8).
42. Carefully move the stand and position it at the desired location against a wall. If necessary,
adjust the pre-attached Floor Levelers at the bottom of Legs (R and S) to level the unit. Now,
follow the instructions printed on the plastic bag containing Tipping Restraint Hardware Kit to
attach the tip-over restraint to the Floater Post and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be
attached to a wall stud. Depending upon your wall construction, different anchor hardware maybe
required. Please contact your local hardware store for assistance. Young children can be seriously
injured by tipping furniture. You must install the Tipping Restraint Hardware with the unit to
prevent the unit from tipping, causing any accidents or damage. The tipping restraints are intended
only as a deterrent, they are not a substitute for proper adult supervision. The tipping restraints are
not earthquake restraints. If you wish to add the extra security of earthquake restraints, they must be
purchased and installed separately.
43. The stand is now ready for use. Swivel the TV left-or-right for optimum viewing control.
TV
R
S
