Assembly
1:
Connecting the leg to the table top
2:
Connecting the leg connecting
tube to the cross connecting
bar
3: Attaching connecting tube to the leg 4: Attaching the ash tray to the
bowl
Fig1: Put leg connecting tube (H) to the cross
connecting bar (I), repeat this step for each
bar.
Fig2:Attach the leg connecting tube(H) to the
cross connecting bar(I) using 8 bolts(BB)
and 8
washers(CC).Do not completely tighten the
bolts(BB).
Put the table top (F) as shown. Connect the leg
(G1, G2) to the table top (F) with eight nuts (AA)
Do not over tighten.
Place the table top (F), cross connecting bar as
shown. Attach connector (H/I) to the
assembled leg (G1, G2) using eight bolts (BB)
and eight washers (CC) .Fully tighten all the
previously assembled bolts.
Attach the ash tray (E) to the bowl (D) using
three bolts (DD) and three nuts (EE), as
shown.
