12
Assembly Instructions
12.
Now, go back and securely tighten all the Cam Locks and Wood Screws. Make sure that all the parts
are tight and there are no gaps between the pieces. This will help keep the unit square.
13.
Ask for help to flip the assemled unit around at its front edge.
14.
Unfold the Back Panel (J) and lay it onto the back of the assembled unit. Make sure that the mounting
holes for the Cable Wheels (K) on the Back Panel (J) align with the threaded inserts on the back of
Partition Panel (E) properly and the overlaps on the panels are even all the way around. Secure the Back
Panle (J) in place by screwing the 5/8” Washer Head Screws (7) into the pilot holes on the Back Panel.
NOTE:
We recommend attaching the back panel with the screws at the top edge first.
J
7
J
J
D
C
5/8” Washer Head Screw
(32 used in this step)
⑦
