8
Assembly Instructions
4.
Insert 2 Wood Dowels (3) into the inner holes on the bottom edge of Partition Panel (E). Tap in with a
rubber mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels.
NOTE
: It is very important to use a small amount of glue on both ends of dowels.
5.
Align the inserted Wood Dowels (3) on the Partition Panel (E) with the drilled holes on the Bottom
Panel (D) and press them together. As shown. Make sure that the finished edge of the Partition Panel
(E) points towards the molding of the Bottom Panel (D). Insert two 1-1/2”
Screw
s (5) through the drilled
holes on the Bottom Panel (D) and securely screw into the bottom holes on the Partition Panel (E).
D
E
Wood Dowel
(2 used in this step)
③
1-1/2”
Screw
(2 used in this step)
⑤
