Betstco Value Leader AM Series, Operations & Parts Manual

Page: 15 / 34

15
Value-Leader AM Boom Hedge Cutter 15 Revision 1-22-2018
MAINTENANCE OF THE MACHINE
a) After the first 20 working hours and then periodically, check the tightening of:
All the bolts, also on the gearbox and pumps:
Hoses connections
b) If vibrations occurs, stop working immediately, disengage the PTO and check the conditions of the
blades. Make sure that they swing free and, if necessary, replace those broken or worn out. Before
proceeding with operations, the machine must be closed in transport position.
c) Always keep the rotor clean. If necessary, remove foreign material that might be kinked
inside
the cutting head and/or around the rotor.