background image

Features and Benefits

The Ice Maker is different from traditional commercial ice makers. Its unique design and portability
makes it possible to use in any place,no matter where you are, just connect to the power, then you can
get enough ice. It is micro computerized and makes ice in only 6 to 18mintues.

Through each cycle the ice maker completes the following steps:
1. Water filling 

2. Ice making 

3. Water releasing

4. Ice dropping 

5. Ice transfer 

6. Ice storage

It is reliable and convenient for operation.

Indicator lights and voice will alert you that ice is ready or that the water reservoir is empty and water
needs to be added.

Notice:

During the first ice cube production cycles it may be that the ice cubes are partly not produ-

ced in the desired 

clear 

quality but conventional milky. This is normal. It is only visual and is no mal-

function. The produced milky ice cubes still conform to normal water quality standards.       

Control Panel Operation

press this button to turn the machine on

press this button to turn the machine off

press this button to change which time need to be changed

press this button to set the time

ice full indicator,it turns on when the ice is full

deficient indicator,it turns on if water in water reservoir is not enough

Notice: please make sure the water is not over the max water level

ice making indicator, it is running when the machine is on ice making

turn on and turn off indicator, machine turns on/off at setting time

time indicator

E

Parts Description and illustration of Unit

1   Upper Cover
2   Front Cover
3   Control Panel
4   Ice Basket

Specifications

Daily Ice Output: 

10 -15kg/24h

Ice Storage Capacity: 

600g

Water Reservoir Capacity:  2 L
Refrigerant:

R134a

Dimension:

340x410x365mm

Suggestion

1. 

After adding water or taking out of ice, it is better to press the “STOP” then the “START”,
the  achine will recover faster

2.

Please note, if a power failure occur due to disconnection of the power cord, or the off
power button has been pushed off during an ice making cycle, small ice chips may be
formed,this is common, just restarting it, it is ok.

3. 

Please make sure the water is not over the max water level in the water reservior

5   Water Reservoir
6   Back Cover
7   Fan Cover

IceBoy Anleitung  30.10.2009 9:05 Uhr  Seite 5

Summary of Contents for IceBoy









Reviews: