16
1. CLEANING THE RECOVERY TANK
A. Raise the vacuum cover (
1
).
B. Remove the drain hose (
2
) from it's hook and empty the tank.
C. Rinse the inside of the tank with water.
D. Close the cover on the machine and replace the drain hose cap and drain
hose.
WARNING: Always wear gloves when doing this operation to pro-
tect yourself from contact with hazardous chemicals.
2. CLEANING THE VACUUM FILTER
A. Raise the cover.
B. Remove the vacuum filter cover by rotating it clockwise.
C. Pull the filter straight down from the lid to remove it.
D. Use water to clean the walls and base of the filter.
E. Reassemble all the components.
WARNING: Always wear gloves when doing this operation to pro-
tect yourself from contact with hazardous chemicals.
3. CLEANING THE VACUUM HOSE FILTER
A. Raise the vacuum cover.
B. Rotate the inner filter (
1
) and remove it.
C. Use water to clean the walls and base of the filter.
D. Reassemble all the components.
WARNING: Always wear gloves when doing this operation to pro-
tect yourself from contact with hazardous chemicals.
DAILY MAINTENANCE
Summary of Contents for Stealth ASD20BT
