BETCO GENIE CE HD APS, Operator And Parts Manual

Page: 12 / 36

12
3. REPLACING THE SQUEEGEE BLADES
Examine the condition of the squeegee blades. Replace as necessary. To replace
the blades:
A. Lift the squeegee.
B. Remove the two knobs.
C. Detach the squeegee from the squeegee yoke.
D. Remove the hose from the squeegee hose adaptor.
E. Unscrew the squeegee knobs that hold the band clamps on squeegee shoe.
F. Remove the band clamps and squeegee blades.
G. Replace the squeegee blades and band clamps.
H. Reinstall everything by performing this procedures in reverse.
4. BRUSH DISASSEMBLY
A. Lift the squeegee.
B. Lift the front of the machine by pressing down on the handle until the brush
is 2” - 4” off the floor.
C. When the brush is lifted jog the brush motor. The brush releases automati-
cally and falls onto the floor.
WARNING: Carry out all maintenance operations with the power
cord unplugged from the wall outlet.
WARNING: Make sure there are no objects or people in the vicinity
of the machine during brush removal.
DAILY MAINTENANCE