7
1. INSPECT THE MACHINE
Before each use inspect the machine, hoses, and cleanliness and completeness.
Ensure the spray nozzles on the cleaning tool are tight.
2. REMOVE RECOVERY TANK
Release the two latches on the side of the machine, grasp the handle on top of
the recovery tank, and pull the recovery tank up and off the solution tank. Set
the recovery tank aside.
3. FILL SOLUTION TANK
Fill the solution tank with clean water. The heater on the H series is designed
to provide nearly instant hot water for cleaning. If you use warm water in the
solution tank it will increase the heaters efficiency.
Never use water above 120° F (49° C) in the solution tank.
Replace the recovery tank back onto the solution tank and secure both latches.
4. SAFELY PLUG IN MACHINE
Turn off all the switches. Plug the power cords into properly grounded outlets.
5. CONNECT HOSES
Connect the solution hose and the vacuum hose to the machine and to the
cleaning tool. Turn on the pump switch and depress the trigger on the tool for a
few seconds to fill the heater and lines with water.
MACHINE OPERATION
Summary of Contents for FiberPRO 2.5 H
Page 9: ...9 ...
