background image

4

The regulations below must be carefully followed in order to avoid harm to the operator and damage to the machine.

•  Read all labels on the machine carefully. Do not cover them for any reason and replace them immediately if they become 

damaged.

•  The machine must be used exclusively by authorized and trained personnel. 
•  When operating the machine be careful of other people. 
•  The power cable outlet must be provided with a proper ground.
•  Avoid damaging the power cable by crushing, bending, cutting or stressing it.
•  Whenever the power cable is damaged, immediately contact a BETCO service center. 
•  Do not set containers on the machine.
•  Machine storage temperature is between -10°F and 130°F, never store outside under humid conditions.
•  Operating conditions: room temperature between 33°F and 100°F with relative humidity between 30% to 95%.
•  Only use the machine in closed areas and do not expose it directly to rain.
•  Never use the machine in an explosive environment.
•  Do not use the machine as a means of transport.
•  Never use acidic chemicals which could damage the machine.
•  Never vacuum up flammable liquids.
•  Never use the machine to gather dangerous powders.
•  Use a powder fire extinguisher in case of fire. Do not use water.
•  Do not hit against shelving or scaffolding. The operator must always be equipped with the appropriate safety device 

(gloves, shoes, helmet, glasses, etc.)

•  If the machine does not work properly, perform routine maintenance. Otherwise, request the assistance of the BETCO 

technical service.

•  When replacing parts ask for ORIGINAL spare parts from your Authorized BETCO Dealer and/or Retailer.
•  Always turn off the machine and disconnect the power supply whenever maintenance is performed.
• 

Never wash the machine with direct or pressurized jets of water or with corrosive substances.

•  Have your BETCO service center check the machine once a year.
•  When your BETCO machine is ready to be retired, the machine must be disposed of properly. It contain oils and electronic 

components. The machine was built using totally recyclable materials.

•  Liquid ejected from the spray nozzle could be dangerous as a result of its temperature, pressure, or chemical content.
•  Keep loose clothing, hair, fingers, and all parts of body away from openings and moving parts.
•  Replace the cord or plug immediately if the ground prong becomes damaged.
•  Do not handle the plug, the cord, or the machine with wet hands.
•  Do not leave the machine unattended when it is plugged in. Unplug the unit from the outlet when not in use and before 

servicing.

•  Do not use this machine to dry vacuum before wet cleaning.

GENERAL SAFETY REGULATIONS

Summary of Contents for FiberPRO 2.5 H













Reviews: