BETCO Fastdraw, Technical Manual

Page: 8 / 16

8
Step 2: Mounting the Chemical Storage Rack
1. Hold the rack to the wall. Use the level to ensure that the
rack is straight.
2. Using the back of the rack as your template, make marks
on the wall where holes should be drilled.
3. Use the 9/32” drill bit to drill holes where marked on the
wall surface.
4. Insert the anchors into the drilled holes, tapping gently
with the hammer if needed.
5. Hold the rack to the wall. Insert the screws through the
rack mounting holes and into the anchors. Tighten the
screws to secure the rack to the wall.
6. Hold the FASTDRAW refill bottle by the handle and place
it into the rack; the handle and the FASTDRAW number
should be facing you. Insert up to 4 products into the
FASTDRAW Rack.
(Optional) To lock the rack, slide the bar between the
handles and the bottle neck. Place the lock through the
loop in the bar. Secure the lock.
7. FASTDRAW
®
System Installation
(continued)