22/40
curve in this position and save this. The vertical gray line at this
location in the diagram is adjusted simultaneously when the reference
value is changed.
• Select the function
and execute this function repeatedly until
the nominal value is equal to 10% (press <ENTER> button 5 times).
• Change the reference value using the steps described for 5%.
• Set further reference values in the same way.
When all of the desired settings have been made, change to the standard window
by using
.
3.5 Measuring
3.5.1 General
Position the instrument by means of the positioning target on the
patch and lower the measuring head. The symbol will appear in
the LCD. Keep the measuring head lowered until the measurement
value is displayed. If the measuring head was released before the
completion of the measurement, indicated by the blinking
symbol, the measurement must be repeated.
Important:
For precise measurements, make sure the medium
Important:
For repeatable measurements, it is
recommended to hold the measuring
head on the right and left side approxi-
mately at the level of the locking element
and to lower it. Incomplete lowering of the
measuring head leads to a blurred image
and consequently to an inexact
measurement result
.
Summary of Contents for Ultra Dottie II
Page 1: ...CTP Calibrator Operating Manual THE QUALITY CONTROL COMPANY Version 1 03 ...
Page 2: ...1 40 ...
Page 41: ...40 40 of ...
