21/40
To move to the next sampling point, select
or
.
You delete a value using
and
.
The position of the nominal value is marked by a small black arrow
on the X axis of the diagram. After initially selecting the nominal
value select
to delete the value.
Example: Inputting a reference curve with the sampling points 5, 10,
30, 60 and 90.
• Select the reference curve window from within the settings window.
• Select the function
with the <UP> or <DOWN> button and
execute this using the <ENTER> button. All reference values are reset.
• Select the function
and execute this function repeatedly until the
nominal value is equal to 5% (press <ENTER> button 5 times).
• Select the function
.
• The default value for this sample point corresponds to the nominal
value. Now select the function
to increment
or to decrement
and press the <ENTER> button. If the reference curve is altered at
least once, the Ultra Dottie II will create a sample point for the reference
Summary of Contents for Ultra Dottie II
Page 1: ...CTP Calibrator Operating Manual THE QUALITY CONTROL COMPANY Version 1 03 ...
Page 2: ...1 40 ...
Page 41: ...40 40 of ...
