Beta RR 50 CC series, Owner'S Manual

Page: 36 / 48

3
CHECKS AND MAINTENANCE
36
GB
FRONT BRAKE
Check
To check the wear of the front brake pads,
visually inspect the caliper from below. The
lining on the visible ends of the two brake
pads should be at least 2 mm thick.
If this layer is thinner than 2 mm, replace
the pads immediately.
Note:
Check the brakes every 2.5.00 km/1.5.00
miles.
To replace, contact authorised Betamotor
customer service.
REAR BRAKE
Check
To check the wear of the rear brake pads,
visually inspect the caliper from below. The
lining on the visible ends of the two brake
pads should be at least 2 mm thick. Should
the lining be thinner, immediately replace
the brake pads.
Note:
Check the brakes every 2.5.00 km/1.5.00
miles.
To replace, contact authorised Betamotor
customer service.
2 mm
2 mm