Beta RR 50 CC series Owner'S Manual Download Page 21

Page: 21 / 48

GENERAL INFORMA

TION

FRAME ................................................................. steel double cradle frame

WHEEL DIMENSION (ENDURO, ENDURO STANDARD)

front tyre .................................................................................80/90 - 21

rear tyre ................................................................................110/80 - 18

front rim ........................................................................................21x1,6

rear rim ......................................................................................18x1,85.

WHEEL DIMENSION (FACTORY)

front tyre .................................................................................90/90 - 21

rear tyre ................................................................................120/80 - 18

front rim ........................................................................................21x1,6

rear rim ......................................................................................18x1,85.

WHEEL DIMENSION (MOTARD, MOTARD STANDARD and TRACK)

front tyre ...............................................................................100/80 - 17

rear tyre ................................................................................130/70 - 17

front rim ......................................................................................17x2,5.0

rear rim ......................................................................................17x3,5.0

FILLING CAPACITY

fuel tank......................................................................................... 6 liters

including reserve of............................................................................1 liter

cooling circuit liquid

All the models ................................................................................ 5.00cc

FACTORY ..................................................................................... 85.0cc

crank case transmission oil ................................................10W/30 - 820cc

FRONT SUSPENSION

Hydraulic fork with Ø40 mm shaft (ENDURO - MOTARD - TRACK)

Hydraulic fork with Ø37 mm shaft (ENDURO STANDARD - MOTARD STANDARD)

Hydraulic fork with Ø41 mm shaft (FACTORY)

Level with tube at its limit ................................................................110 mm

Q = 390 ±5.cc (Right and left stem)

- Viscosity at 40 °C Right stem ...................................................... 32,45.

- Viscosity at 40 °C Left stem ........................................................ 46,00

front wheel travel (ENDURO) ..........................................................245. mm

front wheel travel

(ENDURO STANDARD - MOTARD - MOTARD STANDARD) ...............210 mm

front wheel travel (FACTORY) ..........................................................25.0 mm

front wheel travel (TRACK) ..............................................................190 mm

Summary of Contents for RR 50 CC series

















































Search results

Summary of Contents for RR 50 CC series

Reviews:

Related manuals for RR 50 CC series

Brands by name

Popular brands

Beta RR 50 CC series, Owner'S Manual

Search results

Summary of Contents for RR 50 CC series

Reviews:

Related manuals for RR 50 CC series

Brands by name

Popular brands