Beta 2008 URBAN 125cc, Service Manual

Page: 128 / 370

3
CHECKS AND MAINTENANCE
54
GB
A
B
E
D
F
G
H
I
How to remove the plate holder
To remove the back plate holder
A
including the lights and indicators, first
remove the saddle (see previous page),
then:
•
loosen the three screws and the fixing
nuts B of the back plate holder.
•
disconnect the electric connections of the
back lights and remove the plate holder A .
WARNING:
The motorbike cannot be driven
without a plate holder and/or lights. It
can only be driven in private tracks and/
or traffic-barred areas.
Removing
the front mudguard
Remove the front mudguard by unscrewing
the 4 fixing screw
C .
Removing the stand
•
Remove the fixing system D (screw and
nut).
•
Pull out the stand
E
while taking care
not to lose the draw spring F .
Notes:
while disassembling the motorbike, take
care not to damage the magnet and the
stand sensor
G .
Removing the passenger’s footrests
•
Loosen the two screws H shown in the fig-
ure and remove the passenger’s footrest
complete with the frame fixing support.
How to remove the helmet lock
To remove the helmet lock, just remove
the two screws
I .
C