PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease.
Additional personal protective equipment to wear according to the values found in the environmental hygiene/risk
analysis survey if the values exceed the limits under current regulations.
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING PNEUMATIC TOOL
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL OR PERFORMING
MAINTENANCE JOBS
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE OPERATING
PNEUMATIC TOOL
ALWAYS WEAR SAFETY SHOES
WEAR ANTI-VIBRATION GLOVES WHILE OPERATING PNEUMATIC TOOL FOLLOWING A
SPECIALLY CONDUCTED SURVEY OF LEVEL OF DAILY EXPOSURE OF HAND-ARM SYSTEM TO
VIBRATION
WEAR PROTECTIVE MASK AGAINST PHYSICAL AGENTS ACCORDING TO THE VALUES FOUND
IN THE ENVIRONMENTAL/INDUSTRIAL HYGIENE SURVEY
TECHNICAL DATA
POWER
FREE SPEED
0.45 kW
AIR INLET
16,000 rpm
MAXIMUM PRESSURE
1/4” GAS
MINIMUM INTERNAL HOSE SIZE (ø)
6.2 bars
MEAN AIR CONSUMPTION
10 mm
WEIGHT
400 l/min
LENGTH 1.6
kg
HEIGHT
226 mm
BELT SIZE
145 mm
NOISE (ISO 15744)
20X520 mm
SOUND POWER LEVEL
LwA = 84 dB
SOUND PRESSURE LEVEL
LpA = 92 dB
VIBRATIONS (ISO 28927)
VIBRATION LEVEL
0.8 m/s
2
Uncertainty
K=0.48 m/s
2
KEY TO SYMBOLS
a: air inlet 1/4” GAS
i: belt wheel
b: sander start lever
l: arm adjustment locking screw
c: safety lever
m: belt release spring
d: air outlet
n: sand belt
e: sander guard
o: hexagon key wrench
f: belt direction of rotation indicator
p: speed adjusting screw
g: belt arm
q: oil lubrication
h: belt alignment screw
INSTRUCTIONS
Air supply connection
For correct use of the pneumatic tool, always keep to a maximum pressure of 6.2 bars, as measured at the tool inlet. Feed the
pneumatic tool with clean, condensate-free air
(picture 6-a)
. Excessively high pressure or humidity in supply air results in shorter life
for the mechanical parts and may damage the tool.
WEAR PROTECTIVE HELMET
