Problem
Cause
Corrective Action
- The pump does not draw or build
up pressure
7KHÀXLGFRQWDLQHULVHPSW\
- Pressure regulator completely
closed or completely open.
- Suction hose is kinked aspirazione
- Air in the hose
- The shut-off valve 2 is in the
©&/26(ªSRVLWLRQ
- Replace the container
- Set the proper working pressure
(approx. 2 bar
- Remove kinks from the hose or
replace, if defective
- Vent the unit as for initial operation
- No power to the unit
- Fuse defective
- Replace the fuse
- The pump does not relieve
SUHVVXUHDIWHU¿OOLQJ
- The pressure regulator was
regulated downward during
WKH¿OOLQJSURFHVV
- Turn the pressure regulator to
the right to the relief point.
INSTRUCTIONS FOR USE
EN
8
$
lways keep the machine clean.
1HYHUFOHDQWKHXQLWZLWKDVWHDPVSUD\
%HIRUHDQ\ZRUNRQWKHPDFKLQHLWVHOISXOOWKHPDLQV
plug.
Maintenance and Cleaning
What is to be done in case of a Problem?
&RQWDFW RXU FXVWRPHU VHUYLFH ZKHQ \RXU XQLW GRHV QRW
RSHUDWHÀDZOHVVO\LQVSLWHRIKDYLQJIROORZHGWKHLQVWUXF
-
tions give above. You will be helped quickly and reliably.
We declare under our sole responsibility that this product
is in conformity with the following standards an standardi-
sation documents: EN 292, EN 60204-1, EN 61000-6-2,
EN 61000-6-4 according to the provisions of the regula-
WLRQV((&((&(&
05
Declaration of Conformity
0$66,02&,&(5,
( Managing Director)
Data: Date:
.......................................
