Beta Max Beta Lite, Operating And Maintenance Procedures

Page: 102 / 139

Periodic Maintenance
B e t a M a x P o r t a b l e H o i s t s O p e r a t i n g a n d M a i n t e n a n c e P r o c e d u r e s M a n u a l
www.betamaxhoist.com
7-8
1-800-233-5112
7.4 Wire Rope
Periodic maintenance of the wire rope is important to ensure long rope life and
smooth hoist operation. The rope should always have lubricant present and not
become dry to the touch. Inspection for wire rope lubrication should be performed
daily and, if needed, apply the recommended lubricant. Beta Max, Inc.
recommends using 90W gear lube generously (not dripping) applied with a shop
towel.
WARNING
Always wear heavy gloves when handling the wire rope to prevent possible hand injury. Never place
hand between UP limit bar and drum.
Beta Max, Inc. recommends wire rope annual inspections by authorized service
personnel for overall service conditions. If wire rope diameter at any time
measures less than 3 percent of the original size, wire rope must be discarded and a
new rope installed.
WARNING
If the usability or integrity of the wire rope is ever in question, replace the wire rope immediately to
avoid possible personal injury or potential equipment damage.
WARNING
Never use a rope that has become knotted. It is unusable at this point and should be discarded.