Beta Max Beta Lite, Operating And Maintenance Procedures

Page: 12 / 139

Introduction and General Description
B e t a M a x P o r t a b l e H o i s t s O p e r a t i n g a n d M a i n t e n a n c e P r o c e d u r e s M a n u a l
www.betamaxhoist.com
1-2
1-800-233-5112
1.1 Description
The Beta Max portable electric utility hoists are general-purpose hoists designed
for the construction industry. These hoists are also suitable for other applications
that require a compact, lightweight, easy to handle, and efficient hoisting unit. The
hoists can be mounted in a variety of ways to serve various applications. Beta Max
portable hoists are powered by either a 110V or 220V AC reversible electric
motor. Large units may use three-phase power and standard units use single-phase
power. Units are NOT field changeable between 110V AC and 220V AC.
A conical brake system is incorporated into the design that will hold the maximum
load in place when electrical power is lost or when the load is intentionally
suspended or stopped by the operator. The motor is fan cooled and all electrical
components are protected from the weather. The gear reduction system is
completely enclosed in a die-cast aluminum housing with a sealed lubrication
system. Gears and bearings operate in an oil bath. All Beta Max portable hoists
have an emergency UP limit switch, which stops the hoist motion when the load
has reached the upper limit of travel.
Beta Max portable hoist lifting capacities range from 200 pounds (90 kilograms) to
2000 pounds (907 kilograms), depending on the model. Lifting speeds range from
25 feet per minute (7.6 meters per minute) to 80 feet per minute (24.4 meters per
minute). And load lifting heights range from 30 feet (9.1 meters) to 450 feet (137.2
meters). All hoists are factory equipped with rotation-resistant wire rope for load
and lifting stability.
Before contacting technical support, please locate and write down the model and
serial number for reference. The technician will ask for this information to help
resolve the issue in a timely fashion. The model name and serial number are shown
on the black and white decal on the control box. The serial number is also stamped
on the transmission casting.
DISCLAIMER, PLEASE READ BEFORE CONTINUING: Failure to follow
the guidelines in this manual is the sole responsibility of the equipment end user/
operator. Beta Max, Inc. is not and will not be held responsible or liable for injury
or damages resulting from the end user/operator not following the guidelines set
forth in this manual.