19
S-S-003665
CAUTION: YOU MUST ENSURE THE PUMP IS UNPLUGGED BEFORE BEGINNING SPA MAINTENANCE TO AVOID RISK OF INJURY OR DEATH.
Filter Cartridge Maintenance
NOTE:
To ensure your spa water stays clean, check and clean your filter cartridges every day follow the steps below.
NOTE:
We recommend changing your filter cartridges every week or, if the filter cartridges remain soiled and discolored, they should be replaced.
Water Maintenance
Keeping your SPA water clean and chemically balanced is necessary. Simply cleaning the filter cartridge is not enough for proper maintenance, we
recommend you use pool chemicals to maintain water chemistry and chlorine or bromine tablets (do not use granules) with the chemical floater.
As a guide, the water should be changed about every 3 days. This is only a guide; water quality is influenced by frequency of use, persons using
the spa and general maintenance.
Note:
We recommend you take a shower before using your Lay-Z-Spa, as cosmetic products, lotions, and other residues on the skin can quickly
degrade water quality.
To use the chemical floater, please follow the below instruction.
MAINTENANCE
P6653
Filter Set
58323(VI)
Filter Cartridge
Using chemical tablets:
Using chemical liquid:
NOTE:
Remove the chemical floater from spa when the spa is in use.
IMPORTANT:
After performing chemical maintenance and before using the spa, use a test kit (not included) to test the water chemistry.
We recommend maintaining your water as table below.
pH
Total Alkalinity
Free Chlorine
7.4-7.6
80-120 ppm
2-4 ppm
NOTE:
Damage resulting from chemical imbalance is not covered by the warranty. Pool chemicals are potentially toxic and should be handled
with care. There are serious health risks from chemical vapors and the incorrect labeling and storage of chemical containers. Please consult
your local pool supply retailer for more information about chemical maintenance. Pay close attention to the chemical manufacturer's instructions.
Spa damage resulting from misuse of chemicals and mismanagement of spa water is not covered by the warranty.
Air-Valve Adjustment (For #54113 #54129 Only)
In case of air leakage, check the air-valve first. Using soapy water, cover the air-valve to check if air is leaking, if so, use the provided wrench to
fasten the air-valve following these steps:
C
o
n
t r
o
ls
a
ut
o-
l oc
k
in 5
m in
. To
u nlock/
l ock pla
c e fin
ger
o v
er
fo
r
3s
ec
.
TEST
C
o
n
tr
o l
s
a
u
t o
-lo
ck
in
5
mi
n. T
o unl
ock/ lock pla c
e fin
g e
r o
ve
r
fo
r 3
se
c
.
TEST
•ΝАТЭСΝШЧОΝСКЧН,ΝСШХНΝЭСОΝЛКМФЬТНОΝШПΝЭСОΝКТЫ-ЯКХЯОΝПЫШЦΝЭСОΝТЧЧОЫΝЬТНОΝШПΝЭСОΝЬpКΝаКХХΝКЧНΝЭuЫЧΝЭСОΝаЫОЧМСΝМХШМФаТЬО.Ν
NOTE:
1. Do not over tighten.
2. Always check the air-valve carefully before use.
3. Do not adjust the air-valve connector when the spa
is in use.
