NOTE:
Drawings for illustration purpose only. May not
reflect actual product. Not to scale.
1. Insert the plug.
2. Press the “RESET” button, the indicator light turns on.
3. Press the “TEST” button, the indicator light turns off.
4. Press the “RESET” button, the indicator light turns on.
5. Press the “On/Off” button for 2 seconds, your pump is ready to use.
WARNING:
Before inserting plug into a power outlet, make
sure the current rate of the power outlet is suitable for the
pump.
WARNING:
Using an extension lead or multi plug adaptor
with the spa heater can cause the plug to overheat, causing
damage to the equipment and surrounding items. The spa
is a class I electrical appliance and must be connected
directly to a grounded socket. It is recommended to only
use a socket which is resistant to humidity and capable of
high power loading. Regularly check the plug and socket for
signs of damage before using the spa – do not use the spa
if the plug or socket is damaged. If you are unsure about
the quality of the electrical supply, please consult a qualified
electrician before use.
WARNING:
The PRCD plug must be tested before each
use to avoid risk of electric shock.
WARNING:
Do not use the pump if this test fails. For
assistance, please visit the support section on our website,
www.bestwaycorp.com.
PRCD Test
RESET
TEST
2
RESET
TEST
4
RESET
TEST
1
3
RESET
TEST
15
max
min
MAX.
MIN.
13
12
