A. To test the GFCI plug, insert it into a grounding type receptacle.
B. Press the “RESET” button; the indicator turns on.
NOTE:
If the indicator light is not on, the test has failed.
C. Press the “TEST” button. The indicator turns off.
NOTE:
If the indicator light is not off, the test has failed.
D. Press the “RESET” button, the indicator light turns on, and the blower is ready for use.
WARNING:
Risk of electric shock. The GFCI must be tested before each use.
WARNING:
Do not use the blower if the above test fails. Please contact your local Bestway Customer Service.
GFCI Test
RESET
TEST
RESET
TEST
RESET
TEST
A
B
C
D
GROUNDING METHODS
Grounding Pin
ON/OFF SWITCH
OFF — O
ON — l
WARNING:
• To reduce the risk of fire or electric shock, do not use this air blower with any solid-state speed control device.
• Prevent sharp and hard objects from dropping into and prevent liquid from flowing into the air blower.
• Do not wash the air blower with liquid, you must first unplug it from power source and then wipe it with wet cloth
when you clear it.
• Do not draw and pull motor leads, and do not bump the air blower, you’d better use the air blower between negative
five and fifty centigrade, If you let the air blower be baked in the high temperature, motor leads
,
enamelled cables
and heating bodies will aging and shorten it’s life.
CAUTION - ELECTRICALLY OPERATED PRODUCT:
NOT RECOMMENDED FOR CHILDREN UNDER14 YEARS OF AGE. AS WITH ALL ELECTRIC PRODUCTS,
PRECAUTIONS SHOULD BE OBSERVED DURING HANDLING AND USE TO PREVENT ELECTRIC SHOCK.
KEEP CHILDREN AWAY:
Do not allow children to play with or around the unit, in any way, which could result in injury.
PROTECT POWER CORD FROM DAMAGE
:
Never operate a unit with a damaged power cord, as this may lead to electrical or fire
hazards. If the power supply cord is damaged, it must be replaced by a cord of the same type and amperage rating.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Warning: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
OPERATION
Place the air blower on a steady net surface where children can be kept away. This air blower is for use on a
nominal 120-volt circuit and has a grounding plug similar to the plug illustrated in sketch (A). Only connect the
product to an outlet having the same configuration as the plug. Do not use an adapter with this product.
Keep Unit Grounded:
Air blower should be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire for the electric current. This product is equipped with
a cord having a grounding wire with an appropriate grounding plug. The plug must be plugged into an outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
Warning:
Improper installation of the grounding plug is able to result in a risk of
electric shock. When repair or replacement of the cord or plug is required, do not
connect the grounding wire to either flat blade terminal.
The wire with insulation having an outer surface that is green with or without
yellow stripes is the grounding wire.
CAUTION:
Check with a qualified electrician or serviceman when the grounding
instructions are not completely understood, or when in doubt as to whether the air
blower is properly grounded. Do not modify the plug provided. If it will not fit the
outlet, have the proper outlet installed by a qualified electrician. The appliance
must be positioned so that the plug is accessible. If the supply cord is damaged, it
must be replaced by the manufacture or its service agent or a similarly qualified
person in order to avoid a hazard.
3
