BestWater Jungbrunnen 33-00 ULTIMATE, User Manual

Page: 46 / 80

46
The Quick Connects
You must install (or remove) the
respective quick connects onto the
underside of the system in order to
properly connect the Jungbrunnen
66-00/33-00 ULTIMATE to your
water supply and be able to fi lter
water.
Use the images below for assistance
and orientation.
Water may leak out
from the BestWater
system if the plastic
hoses are not properly
installed into the quick
connects.
In order to remove the hose from
the quick connect you have to push
the connector ring toward the front
face of the connector, hold the ring
tightly, and pull it out from the hose.
The quick connect can always be
reused.
Stick the hose into the socket until
you feel resistance (approx. 1.5
cm).
Now push the hose until it clicks
(approx. 1 cm).
The quick connect will fasten the
hose so that it cannot be pulled out
again accidentally.
Setting Up and Connecting
EN
3. Remove
hose
2. Push back the
coupling ring
1. Remove
security ring