BestWater Jungbrunnen 33-00 ULTIMATE, User Manual

Page: 50 / 80

50
Fasten the clamp to the traps. Turn
the screws equally among the drain
installation kit.
The Water-Stopper
Follow these steps to connect the
water stopper:
Open the rear battery case of the
Water-Stopper.
Insert one AA battery into the Wa-
ter-Stopper. Change this battery af-
ter each fi lter change, or once per
year.
Close the rear battery case.
Mount the Water-Stopper onto the
corner valve of your cold water
connection. Now screw the 3/4“ Y-
distributor onto the Water-Stopper.
After that you can mount the 1/4“
connector IT to the 3/4“ Y-connec-
tor.
Make sure that the Water-Stop-
per and the 1/4“ IT connector is
only applied fi nger-tight.
Make sure that the contaminant
fi lter is installed in the Water-
Stopper.
Connect the third Water-Stopper
Sensor with the two other Sensors
and place the Third one in the dee-
pest part of your built-in cupboard.
Setting Up and Connecting
EN
Eckventil
3/4“ Y-Verteiler
mit Absprerrventilen
Art. Nr.: 104022
Anschluss für Spül-/
Waschmaschine
Water-Stopper
1/4“ Steckverbinder
mit Innengewinde
Art. Nr.: 108039 1/4“ Schlauch
Art. Nr.: 101018