Bestron COPPER AES1000CO, Instruction Manual

Page: 30 / 48

30
EN
6. Refill the water reservoir with water and decalcifier to the “MAX”-level.
7. Turn the selection button to the “ ” position, the pump starts pumping water and stops after around
90 seconds.
8. Turn the selection button back to the “ ” position and leave the decalcifier for minimal 5 minutes in
the machine.
9. Repeat the process above two to five times. Make sure that the water reservoir does not run
completely empty.
10. After the decalcifying process is complete, rinse the machine 2 to 3 times with clean water. Follow the
steps from “Making espresso”, without coffee powder.
11. After this process is complete, the power indication light and the ready-for-use indication light will no
longer blink alternately, and the machine is ready for use.
ATTENTION:
• If you do not want to clean (the power indication light and the ready-for-use indication light will blink
alternately), turn the selection button quickly to the “ ” position after which you turn the selection
button to the “ ” position. Then turn the selection button to the “ ” position and again back to the
“ ” position. If you do this within 3 seconds, the cleaning warning will stop.
WARRANTY CONDITIONS
Bestron offers a 60-month warranty on this equipment against defects resulting from manufacturing and/or
material errors, subject to the following conditions.
1. No labour or material costs will be charged during this warranty period.
2. Any repairs carried out under the warranty will not extend the warranty period.
3. Faulty parts, or in the event of exchange, the faulty equipment itself, will automatically become the pro-
perty of Bestron.
4. The warranty is valid for the first buyer only and is non-transferable.
5. The warranty is not valid for damage caused by:
• Accidents
• Improper use
• Wear and tear
• Neglect
• Faulty installation
• Connection to a different mains voltage than indicated on the type plate
• Unauthorised changes
• Repairs carried out by unqualified third parties
• Use in violation with the applicable statutory, technical or safety standards
• Careless transport without suitable packaging or other protection
6. Warranty cannot be claimed:
• For damage during transport
• If the serial number of the appliance is removed or changed
7. Items excluded from warranty are:
• Cords
• Lamps
• Glass parts
8. The warranty does not entitle the purchaser to compensation for any damage other than replacement
or repair of the faulty parts. Bestron cannot in any event be held liable for any indirect or consequential
losses caused by or in relation to the equipment it has provided.
9. Claims under a warranty may only be submitted to your (online) retailer or directly to the Bestron Ser-
vice Department. Never send items without being asked to. We may refuse the parcel and you will be
liable for the costs. Contact us first and we tell you how the appliance should be packaged and sent.
Each claim under a warranty must be accompanied by the relevant receipt.
SERVICE
If an unexpected problem occurs, please contact the BESTRON service department:
www.bestron.com/service