WrapAround™ Windjammer™ – Installation Instructions
Rev. C 0910
80035 pg. 2
Parts List and
Hardware Identifi cation
Windjammer™
Qty - 1
“Z” Channel, Part Number 304.64
Qty - 1
Wrap Fabric around Bows
Remove Pivot Bracket with
Top and Hardware Assemblies
Remove Side and Rear Windows
Open the zippers on the Right and Left Side Win-
dows. Remove the windows and store safely (We
recommend storing them in Bestop’s Window Stor-
age Duffl e, 42810.).
Open the zipper on Rear Window. Pull the Tailgate
Bar out of the mounts on the vehicle. Slide the
Tailgate Bar off the Rear Window and set it aside to
be used later.
Release the front of the top from the windshield
and lay the bows down. Refer to owner's manual
for instructions.
Fold the Top Down
Wrap the top fabric tightly around the bows. Then
wrap the legs tightly around the top fabric.
Pull Tailgate Bar out
of Tailgate Mounts
Slide Tailgate Bar off
of Rear Window
Wrap fabric
around bows
Wrap fabric legs
around top fabric
Use a T30 Torx to remove the soft top assembly
and the hardware.
T30 Torx
Remove Bracket
with Top and
Hardware
#8 x 1" Pan Head Screw Part Number 295.95, Qty - 5,
Snap Head Screw, Part
Number 200.49, Qty - 3,
Acorn Locknut, Part
Number 427.11, Qty - 3,
