WrapAround™ Windjammer™ – Installation Instructions
Rev. C 0910
80035 pg. 6
Install Studs
on Webbing
Reinforced
Front Edge
of Duster
At the marked locations, push the sharp end of
a Snap Head Screw through the Duster from the
webbing side, to make a hole. Once a hole is
formed, pull the screw back out of the hole. Then
push the screw through the hole from the vinyl side
so that the snap is on top of the vinyl. Thread an
Acorn Locknut over the pointed end of the Snap
Head Screw. Snap the Duster and the Windjammer
together with the three snaps.
Duster Fabric -
Backing Up
Webbing
Push Snap
Head Screw
through to
form a hole
Duster
Fabric -
Vinyl Up
Acorn Locknut
Snap Head
Screw
Secure Windjammer to
Duster – Optional
Duster
