TrailMax™ DVD Console Installation Instructions
Rev. A 4.19.07
81705 pg. 6
Place the Black DVD Mount Cover
on the sport bar where the dome
light was mounted. Orient the
cover with the rounded molding
against the rear of the sport bar.
Place the Dome Mount Plate on
top of the cover and make sure the
wires are free.
Pre-drill four (4) 3/32" pilot holes
and Install four (4) Self-Drilling
screws to secure the DVD Mount
Cover and the Dome Mount Plate.
Install Black DVD Mount Cover
and Dome Mount Plate
Place the Mid Plate Bracket over
the Dome Mount Plate with the
opening the plate toward the
driver’s side rear. Install four (4)
Machine Screws to secure the
Mid Plate Bracket to the Dome
Mount Plate.
Install Mid Plate Bracket
Plug the wiring harness into the DVD Unit.
Connect DVD Unit
Position the DVD Unit on
the Mid Plate Bracket. Open
the DVD Unit to access the
mounting holes near the con-
trol panel. Use two (2) Long
Machine Screws to mount
the DVD Unit to the Mid Plate
Bracket.
Install DVD Unit
Rear
Front
Black DVD
Mount Cover
Sport
Bar
Dome Mount
Plate
Self-Drilling
Screws
Rear
Front
Dome
Mount
Plate
Mid Plate
Bracket
Machine
Screws
DVD Unit
Plug Wiring
Harness into
DVD Unit
Sport
Bar
Sport
Bar
DVD Unit
Open
Long Machine
Screws
View Looking Up at Sport Bar
Rear
Drill 1/16"
Pilot Holes
If your kit includes two (2) Spacers,
install them between the Dome
Mount Plate and the DVD Mount Cover.
Spacers – If
Necessary
