TrailMax™ DVD Console Installation Instructions
Rev. A 4.19.07
81705 pg. 4
Route the wiring harness to the passenger side sport bar. Unzip the sport bar
cover and route the wiring harness along the sport bar toward the windshield.
Zip the sport bar cover closed.
Thread Wiring Harness under Sport Bar Cover
Unzip Sport Bar
Cover
Wire Harness
Use a phillips screwdriver
to remove the two screws
that secure the passenger
side Sun Visor. Set the vi-
sor and screws aside to be
reinstalled later.
Remove Passenger Sun Visor
Sun Visor
Windshield
Remove 2 Phillips
Screws
Remove the push fastener that holds
the Molded Corner Panel in place. Set
the fastener and panel aside to be
reused later. Then remove the A-Pillar
Panel.
Remove Molded Corner Panel and A-Pillar Panel
Remove Push
Fastener
Windshield
Remove Panel
Windshield
Remove A-Pillar
Panel
Install Butt Connectors
Install a Butt Connector on the end of each wire and install the wires from the
DVD wire harness into the other ends of the Butt Connectors.
Install Butt
Connectors
DVD Wire
Harness
