Page 19
Section 13
Slide Header/Side Bow Assembly into place in Door Rails
Step 1
Align the Header-Bow Assembly in the
tracks in the top of the Door Rails.
The plastic track guide on the Side Bow
Assembly must be located to the rear of the
spring-catch, and in position to slide forward
over the vertical plastic rib in the top of the
Rear Door Rail
Step 2
Slide the whole Header/Side Bow Assembly
forward in the tracks in the top of the Door
Rails, until the button on the inside of each
plastic track guide on the Side Bows slips
under the spring-catch and latches in place.
Step 1
Step 2
Header/Side Bow/Assembly
Right Side
Right Side, Spring-Catch
Looking from
inside the Jeep
Push
