Rev. B 1112
54823 pg. 5
Supertop NX Twill Installation Instructions
Install Foam Tape on Header
Install Foam Tape on Header.
Driver’s Side Shown
Foam
Tape
Install Foam Seal on Header
Install Foam Seal on Header.
Driver’s Side Shown
Foam Seal
Install #3 Bow on Header
Assembly
Use a Pivot Knuckle Bolt to install the #3 Bow to the
Side Bow/Header Assembly.
Pivot Knuckle
Bolt
#3 Bow
Header
Assembly
Assemble #2 Bow to Header /
Side Bow Assembly
Locate the #2 Bow Assembly. Place it on the Side
Bow/Header Assembly.
Front:
Install an M5 x 16 Machine Screw with two
(2) Bushings and an M5 Nylock Nut on the front of
the Side Bow.
Rear:
At the rear install an M5 x 30 Machine Screw
with (2) Bushings and an M5 Nylock Nut.
Repeat these steps on both legs of the #2 Bow
Rear
Front
M5 x 16 Machine
Screw
Bushings
M5 Nylock
Nut
M5 x 30 Machine
Screw
Bushings
M5 Nylock
Nut
