background image

Rev. B 1112

54820 pg. 7

Supertop NX Twill Installation Instructions

Clip the locking block on the Side Bow into the 

rail on the Door Surround.

Sport Bar

Secure Side Bow to 
Door Surround

Close the header latches to secure the front 

of the top to the windshield. Catch the hook in 

the slot in the windshield frame and then close 

the lever over it so that it lays fl at against the 

windshield frame.

Windshield 

Frame

Windshield

Header Latch

Close lever over 

top of hook to lay 

fl ush with windshield 

frame

Catch hook 

in slot

Make sure that the Center Bow is centered in the 

hook and loop fl ap inside the top. Do not fasten the 

fl ap at this time.
Pull down gently on the Rear Bow and work the 

plastic sewn to the rear corners of the top into the 

retainer on the vehicle.

Pull down gently 

on the Rear Bow 

and slip plastic into 

retainer

Secure Rear Corners

Secure Header to Windshield

Open the zipper inside 

the rear corner of the 

top and install a plastic 

stiffener in the pocket. 

Repeat this on both 

sides of the vehicle.

Install Plastic Corner Stiffeners

Install Plastic 

Stiffener in 

Pocket

Sport Bar

Make sure the Side bow is latched to the 

Door surround before you latch the header.

Summary of Contents for 54820













Reviews: