P9 – 4282001 Rev. A 0720
Installation instructions – HOSS HARDTOP HOIST
©BESTOP 2020, inc.
WARNING:
Slide the motor hoist until the tabs are firmly
against the threaded bolts. Do not leave any space between
the bolts and the enclosed end of the mounting tabs.
3
Attach the motor hoist to the motor mounting plate
□
Install the motor over the top of the 4 fixed, threaded bolts on the motor mounting plate (A) and tighten nuts. (It is easier if you install
the nuts loosely on the treads and slide motor on top.)
□
Once the motor hoist is properly positioned on the motor mounting plate, tighten the nut with the ratchet or the adjustable wrench until
the motor hoist is securely attached to the motor mounting plate.
Installation
HOSS HARDTOP HOIST
Vehicule application:
ALL JEEP® WRANGLER
AND GLADIATOR HARDTOP
Part Number 42820-01
