P18 – 4282001 Rev. A 0720
Installation instructions – HOSS HARDTOP HOIST
©BESTOP 2020, inc.
Maintenance
□
Check to be sure the motor is properly attached to its
mounting plate. Make sure the bolts are tight.
□
Periodically check the condition of the electrical cords, plugs
and controls.
□
Periodically check straps for slippage or excessive wear.
Specifications
□
Model: 42820-01
□
Load capacity: 220 lb
□
Lifting Height: 120 in.
□
Lifting speed: 22 ft./min
□
Strap width: 1.25 in.
□
Voltage: 120 V / 60 HZ / 2.35 amps
□
Motor: 280 W 3 / 5 HP
□
Capacitor: 35uF
□
Duty cycle: 2.5 min On, 7.5min Off
TO RAISE OR LOWER THE HOIST:
□
Do not stand under the hoist
□
Press and hold the rocker switch in the direction you want the
hook bar to travel.
□
Release the switch when the desired location is reached.
□
Operator must let the motor stop for 8 minutes after
continuously working for 2 minutes cool after raising or
lowering the lift.
Operating instructions
13
Install the freedom hook to the wall
□
Locate studs and mount to wall using bolt (K).
2 Holes to mount
hook to studs
Installation
HOSS HARDTOP HOIST
Vehicule application:
ALL JEEP® WRANGLER
AND GLADIATOR HARDTOP
Part Number 42820-01
x 2
