P14 – 4282001 Rev. A 0720
Installation instructions – HOSS HARDTOP HOIST
©BESTOP 2020, inc.
7
Level
□
The height adjustment bracket (E) is adjustable to make your hooks perfectly level. Lower your straps to eye level and adjust the pin
in the height adjustment bracket (E) to the desired hole to make your straps level.
8
Test the unit
□
Press and hold the rocker switch on the hand control to raise and lower the hook bar. When the hook bar reaches the uppermost travel
point, the stopper plate above the cable hook will trigger the limit switch ceasing upward movement.
Installation
HOSS HARDTOP HOIST
NOT LEVEL
Vehicule application:
ALL JEEP® WRANGLER
AND GLADIATOR HARDTOP
Part Number 42820-01
□
If you are using a lower hole on your adjustment bracket, use the guide pin to keep the hook straight.
