Rev. C 0114
41412 pg. 3
Tailgate Rack Bracket Installation Instructions
Locate the Vertical Arms and
Gussets in the Parts Kit.
Orient the Vertical Arms with the
two holes toward the top. Press
an End Cap into this end of each
Vertical Arm.
Use two 1/4-20 x 1-1/2" Hex Bolts
and two 1/4-20 Nylock Nuts to
attach a Gusset to the top end of
each Vertical Arm.
Vertical Arm
Gusset
1/4-20 x 1-1/2" Hex
Bolts and 1/4-20
Nylock Nuts
Assemble Vertical Support Arms
Slide a Vertical Arm Assembly
into one of the Channel Brackets.
Adjust the arm up or down to the
desired height and until two holes
are aligned. Install an M8-1.25 x
50 Hex Bolt and an M8-1.25 Lock
Nut in each hole to secure the
arm. Repeat this with the other
Vertical Support Arm Assembly.
M8-1.25 x 50 Hex Bolt
with M8-1.25 Lock Nut
Vertical Support
Arm Assemblies
Left Channel
Bracket
Tailgate
Install Vertical Support
Arms in Channel Brackets
Press an End Cap into the open end of each
Horizontal Arm. Use a 1/4-20 x 3/4" Hex Bolt and
Star Lock Washer to attach the fl attened end of
each Horizontal Arm to the bottom of the Tray. Use a
1/4-20 x 1-1/2" Hex Bolt and a Star Lock Washer to
attach the other end of each arm to the Tray.
Do not overtighten the bolts. This may strip the aluminum
inserts in the Tray.
1/4-20 x 3/4" Hex Bolts
with Star Lock Washers
1/4-20 x 1-1/2" Hex Bolts
with Star Lock Washers
Attach Horizontal Arms to Tray
