Tailgate Rack Bracket Installation Instructions
Rev. C 0114
41412 pg. 4
For further information or request for warranty work, please contact:
Bestop Inc. Customer Service
(800) 845-3567
(303) 465-1755
Limited Warranty
We warrant our product to be free from defects in material and workmanship, for the terms specifi ed below, provided there has been normal use and proper main-
tenance. This warranty applies to the original purchaser only. All remedies under this warranty are limited to the repair or replacement of any item or items found by
the factory to be defective within the time period specifi ed.
If you have a warranty claim, fi rst you must call our factory at the number below for instructions. You must retain proof of purchase and submit a copy with any items
returned for warranty work. Upon completion of warranty work, if any, we will return the repaired or replaced item or items to you freight prepaid. Damage to our
products caused by accidents, fi re, vandalism, negligence, misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not covered under
this warranty.
THE WARRANTY TIME PERIOD IS AS FOLLOWS: ALL “PRODUCTS” MANUFACTURED BY OUR COMPANY: ONE YEAR FROM DATE OF PURCHASE.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE LIMITED IN DURATION TO
THE SAME DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSE-
QUENTIAL DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limita-
tions or exclusions may not apply to you.
This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.
There are multiple holes in the Gusset and the Horizontal
Arm to allow you to adjust the Tray’s fore/aft position.
Place the Tray/Arm assembly over the spare tire and into
the top of the Gussets. Line up the holes in the Gusset and
the Horizontal Arm that place the Tray in the desired posi-
tion. Install two 1/4-20 x 1-1/2" Hex Bolts and two 1/4-20
Lock Nuts to secure each Horizontal Arm to the Gusset.
If you are installing this product on a vehicle
with a Hard Top, you will need to install it in the
rearmost position to allow clearance for the lift
glass. DO NOT load the tray with more than 50 lbs. in this position.
1/4-20 x 1-1/2" Hex Bolts
with 1/4-20 Lock Nuts
Spare Tire
Install Tray Assembly
Do not load
the tray with
more than 75
evenly distributed Pounds. Be careful
when operating the vehicle because the
loaded tray may affect handling. Remem-
ber that the tray extends beyond the spare
tire when backing.
