- 11 -
Switching off your appliance
If the appliance needs to be switched off for an extended period, the following steps should be taken to prevent
mould on the appliance.
1.
Remove all food;
2.
Switch off the appliance by setting the thermostat to position “
0
”
;
3.
Remove the power plug from the mains socket;
4.
Clean and dry the interior thoroughly;
5.
Ensure that all the doors are wedged open slightly to allow air to circulate.
Replacing the light bulb
If the internal light does not work anymore, disconnect then reconnect at once the device.
If the light does not still work, verify if the light bulb is correctly screwed. If in spite of these tests, there is no
light, it is necessary to change the light bulb. Use a 220-240V~, MAX 10W light bulb.
1.
Disconnect the appliance;
2.
Open the light cover;
3.
Undo the defective light bulb anticlockwise.
4.
Screw the new light bulb clockwise.
DOOR REVERSE
Users can change the direction of opening according to one's own needs. The concrete operating sequence is as
follows:
(The pictures below are for the guideline to reverse the door. The appearance of the appliance may be
different from the product you purchased.)
1
Remove the top hinge cover.
2
Lift the door upwards to disengage it from the
middle hinge, put the door to one side and lay it
down gently on a padded surface.
Replaceable (LED only) light source by a
professional
This product contains a light source of
energy efficiency class G.
