English 12 English
Wire Spool Type B300 Loading
WARNING
Turn the input power OFF at the welding power source
before installation or changing a wire spool.
19
22
21
26
27
Figure 6
Turn the input power OFF.
Open the side panel.
Unscrew the Locking Nut [19] and remove it from the
spindle [21].
Place the adapter of spool type B300 [26] on the
spindle [21].Make certain that the spindle brake pin
[22] is put in the hole in the back side of the
adapter [26]. The adapter of spool type B300 can be
purchased separately (see "Accessories" chapter).
Re-install the locking nut [19]. Make sure that the
locking nut is tightened.
26
27
28
29
30
Figure 7
Rotate the spindle and adapter so the retaining spring
[27] is at the 12 o'clock position.
Place the spool type B300 [29] on the adapter [26].
Set one of the B300 inside cage wires [30] on the slot
[28] in the retaining spring tab [27] and slide the spool
onto the adapter.
WARNING
Position the spool type B300 so that it will rotate in a
direction when feeding so as to be de-reeled from bottom
of the spool.
29
27
Fi
gur
e 8
Wire Spool Type Readi-Reel
®
Loading
WARNING
Turn the input power OFF at the welding power source
before installation or changing a wire spool.
19
31
22
21
34
33
32
30
Figure 9
Turn the input power OFF.
Open the spool wire case.
Unscrew the locking nut [19] and remove it from the
spindle [21].
Place the adapter of spool type Readi-Reel
®
[31] on
the spindle [21].Make certain that the spindle brake pin
[22] is put in the hole in the back side of the adapter
[31]. The adapter of spool type Readi-Reel
®
can be
purchased separately (see "Accessories" chapter).
Re-install the locking nut [19]. Make sure that the
locking nut is tightened.
Rotate the spindle and adapter so the retaining spring
[32] is at the 12 o'clock position.
Place the spool type Readi-Reel
®
[34] on the adapter
[31]. Set one of the Readi-Reel
®
inside cage wires [30]
on the slot [33] in the retaining spring tab [32].
