English 9 English
7. Thermal Overload Indicator: It indicates that
the machine is overloaded or that the cooling
is not sufficient.
WARNING
If the welding current exceed 200 A, output power will be
turned off after 5 seconds. It will be indicated by Thermal
Overload Indicator. Output power will be turned on again
after 3 minutes.
8. EURO Socket: For connecting a welding gun (for
GMAW / FCAW-SS process).
9. Positive Output Socket for the Welding
Circuit: For connecting an electrode holder
with lead / work lead.
10.
Negative Output Socket for the Welding
Circuit: For connecting an electrode holder
with lead / work lead.
11. Gas Connector: Connection for gas line.
12. Power Lead with Plug (3m): Power lead with plug is a
standard equipment. Connect the power lead with plug
to the main supply before turning power on.
12
11
Figure 2
13
14
15
17
18
16
Figure 3
13. Wire Drive (for GMAW, FCAW-SS process): 2-Roll
wire drive.
14. Welding Wire (for GMAW / FCAW-SS).
15. Spooled Wire (for GMAW / FCAW-SS): The machine
does not include a spooled wire.
16. Wire Spool Support: Maximum 15kg spools. Accepts
plastic, steel and fiber spools onto 51mm spindle. Also
accepts Readi-Reel
®
type spools onto included
spindle adapter.
17. Shield of Changing Polarity.
18. Terminal Block of Changing Polarity (for GMAW /
FCAW-SS process): This terminal block enables to set
the welding polarity (+ ; -), which will be given at the
welding holder.
WARNING
Positive (+) polarity is set at the factory.
WARNING
Before welding check the polarity for using electrodes and
wires.
If the welding polarity has to be changed, user should:
Switch off the machine.
Determine the wire polarity for the wire to be used.
Consult the electrode data for this information.
Take off the terminal block’s shield [17].
The tip of the wire on the terminal block [18] and work
lead fix as is shown in the Table 1 or the Table 2.
Put on the terminal block’s shield.
WARNING
The machine must be used with the door completely
closed during welding.
WARNING
Not use handle to move the machine during work.
