BESTEK NSP-10H6, User Manual

Page: 28 / 41

28
Trusted Computing
TPM Support
This setting controls the Trusted Platform Module (TPM) designed by the Trusted Computing Group (TCG).
TPMs are special ‐ purpose integrated circuits (ICs) built into a variety of platforms to enable strong user
authentication and machine attestation ‐‐ essential to prevent inappropriate access to confidential and
sensitive information and to protect against compromised networks.
TPM State
This setting indicates the TPM state.
Pending TPM Operation
This function is used to select a TPM command to be issued during the next boot.
CPU Configuration
CPU Configuration
This menu shows the CPU information. Read only.
Limit CPUID Maximum
It is designed to limit the listed speed of the processor to older operating systems.
Execute Disable Bit
It can prevent certain classes of malicious “buffer overflow” attacks where worms can try to execute code to
damage your system. It is recommended you keep this enabled always.
SATA Configuration
SATA Mode Selection
Select a proper SATA mode from IDE or AHCI mode.
Super IO Configuration
Serial Port 0/1 Configuration
Serial Port
This setting enables/disables the specified serial port.
Device Settings
This setting shows the address & IRQ settings of the specified serial port.