BESTEK DNP-850, User Manual

Page: 19 / 33

19
Bypass LED
This LED should go green when Bypass function is disabled, and red when enabled.
First screen & Optimal BIOS Setting
Once the system successfully boots up, it shall activate display signal on monitor, disclosing some system
information as checkpoints for debugging, thereafter users, has this been the first time to boot the unit, are
encouraged to bring up BIOS setup menu to at least load the optimal BIOS setting, as the first thing to do at
power on. Please refer to the BIOS section for substantial details.
Confirm the Hard Drive List
The system is designed to allow booting from a variety of internal devices, including USB pen drive and SATA
drive (such as SATA HDD/SSD or SATADOM). Given the tiny footprint and slow performance of USB pen drive,
SATA drive is a better choice to carry operating system and can be found in the detected drive list, in the
section of IDE Configuration.
In the event that a particular SATA device is not detected and prompted in the device list, hardly would the
system boot from it. Please turn off the system, check or re-apply the SATA cable and SATA power cable to
ensure an appropriate connection.
3.2 Installing Operating System & Drivers