9
9. Lift or turn the remote control`s EMERGENCY SWITCH-OFF button up and
push the green start button, after which the green light should be seen in the
button.
10. Test the functions of the machine with the remote control before mounting the
workpiece.
•
rotation
•
tilt
•
lift
11. For welding, connect the ground cable to the ground socket located in the
machine frame. The machine has one ground socket. If you weld with higher
welding current that 500 amperes, further ground-connect directly to the
workpiece.
12. After you have checked the functions of the machine, you may mount the
workpiece to the T-slot in the table plate. The workpiece should be mounted on
table plate in a way that the central mass of the workpiece is closest as possible
to the center of the table plate.
13. MAKE SURE THAT THE WORKPIECE IS WELL-MOUNTED IN THE TABLE
PLATE.
14. Make sure that there is sufficient free space to handle the workpiece. Do
consider the trajectories of the workpiece in different positions of the table plate..
15. You may begin working with the machine, but please continuously observe
the functions of the machine and the mounting of the workpiece.
17. After you have finished working with the workpiece, switch the machine off.
