16
6 MAINTENANCE
6.1 Maintenance-, check up- and cleaning tasks
Regularly conducted maintenance and operating the machine correctly will
ensure machine`s long lifetime. Thus, carefully comply with these instructions.
Conduct regular check-ups to the machine so it is ready-to-use when necessary.
Bestis- welding positioners employ and connect electrical-, hydraulic- and
mechanical equipment. The technical failures can be avoided the best by taking
care of the proper maintenance, check-ups and cleaning of this equipment.
Contact the manufacturer of manufacturer`s representative if failure situation
occurs!
Check in daily basis
the machine`s general condition
functioning of the motors
suitability of the workplace
abnormal tremor and sounds
overheating
that the protection- and safety structures are on place and in appropriate
condition.
that the hydraulics is compact
Check regularly
cleanness of the table plate
cleanness of the main central
that the retention bolts are tight
quantity of hydraulic oil
condition of the rotation equipment
condition of the cables
condition of the pressure filters
6.2 Maintenance of the electrical device
The manufacturer has set the machine`s parameters on advance. These
parameters must not be changed.
Check the condition of the remote control, cables and sheating. Cables and
sheating must be intact. Broken cables and sheating must immediately be
changed!
In case of an electrical failure contact the manufacturer or the manufacturer`s
representative!
